Authorized Distributor of Milwaukee, TCC, Arrow, Parabond in Dubai and other U.A.E Region.

Features

• High stretch nylon material with 4-way stretch points to fit users arms.
• Tapered design, wider on the bicep and tight on the wrist, to fit the natural arm form.
• Elastic band with non-slip dots on the bicep and stretch wrist cuff to keep the sleeves in place and prevent them from sagging.
• Breathable and lightweight material provides good dexterity and all-day comfort.
• Elastic thumb loop avoids pressure points when using gloves.
• Sun UV rays protection with UPF 50+ according to BS EN 13758-1:2002 +A1:2006 for the covered part of the arms.
• European Certified for cut protection: EN ISO 21420, EN388:2016 (2342C), UKCA.

Basic Information

• Diameter: Ø 10mm
• Working Length: 200mm
• Total Length: 260mm
• Article Number: 4932471235

Product Description

• 2 flute carbide tip for better drilling performance.
• The 2-groove design provides effective dust removal.
• Designed for drilling in concrete (unreinforced) and brick.
• Suitable for drilling holes forchemical and mechanical anchors.
• Made in Germany.

Basic Information

• Diameter (MM): 10
• Pack Quantity: 1
• Total Length (MM): 265
• Working Length (MM): 200
• Article Number: 4932352028

Product Description

• Symmetrical 4 cutter geometry (4 x 90°). Perfect round holes for optimal anchor fitting.
• New sharper angled tip design for easy spot drilling with pinpoint accuracy and increased performance on rebar.
• One piece solid full welded carbide tip on 5-10 mm and one piece slotted carbide tip on 12-32 mm for best lifetime.
• 4 flute geometry: The high volume 4 flute geometry ensures the optimum removal of dust and debris.
• Centering tip for easy spot drilling with pinpoint accuracy.
• Welded solid carbide tip on ? 5-10 mm. Allows for wider flute entrance leading to increased speed. Morecarbide leads to a higher durability of the tip and higher lifetime.
• 4 breaker points pulverize material more efficiently for faster drilling.
• Enhanced rebar guards for improved resistance when hitting rebar.
• New variable flute design. Thin flute at the tip for maximum debris extraction, higher speed, and less friction. Thick flute at the base for higher stability and reduced bit breakage. Up to 20% moreholes per battery charge vs. 4 cutter drill bit in concrete and vs. the previous generation.
• PGM rated.
• Made in Germany.

Features

• Thumb and fore?nger slots for increased comfort and less fatigue. Allows user to push through sheet metal with ease with less risk of cutting oneself.
• Serrated cutting edges prevent slippage when cutting.
• Less hand fatigue when cutting thicker materials. Design with compound leverage action.
• Torsion spring opens jaws automatically during cutting for faster cutting action and less fatigue work.
• Chrome plated rust protected forged blades for increased lifetime. Extra hardened to 65 HRC.
• Made from forged alloy steel for best durability Cr Steel.
• One hand locking mechanism.
• Flush slimline design for non-snagging in material.
• Triple cutting direction identi?cation on the head, handle and by colour coded handle.
• Ergonomic and durable overmoulded grips add comfort and last longer.
• Aviation snips: For short, straight and shaped cuts. Ideal for narrow radius cuts and notch cuts.
• Offset snips: For long continuous straight or curved cuts. 45 offset keeps users hand away from the cutting material.
• Extra long aviation snips: For longer and straighter cuts in one go.

Product Details:

• Ideal for a wide range of breaking and cutting of concrete as well as demolition work.
• Blade Width: 25 mm
• Pack Quantity: 1
• Quantity: 1
• TotaLength (mm): 400
• Width (mm): 25
• Working Length (mm): 25
• Article Number: 4932343738

Product Details:

• FFP2 Rating: Up to 94% protection
• Foldable Respirator: Flat fold for easy carrying on the job site
• One Way Valve: Fog-free and easy breathing
• Exhalatih MILWAUKEE® Safety Eyewear
• European Certification: FFP2 disposable respirator according to EN149: 2001/A1:2009
• Pack Quantity: 15
• Article Number: 4932478801

Basic Information

• Diameter (MM): 14
• Pack Quantity: 1
• Total Length (MM): 210
• Working Length (MM): 150
• Article Number: 4932352037

Product Description

• Symmetrical 4 cutter geometry (4 x 90°). Perfect round holes for optimal anchor fitting.
• New sharper angled tip design for easy spot drilling with pinpoint accuracy and increased performance on rebar.
• One piece solid full welded carbide tip on 5-10 mm and one piece slotted carbide tip on 12-32 mm for best lifetime.
• 4 flute geometry: The high volume 4 flute geometry ensures the optimum removal of dust and debris.
• Centering tip for easy spot drilling with pinpoint accuracy.
• Welded solid carbide tip on ? 5-10 mm. Allows for wider flute entrance leading to increased speed. Morecarbide leads to a higher durability of the tip and higher lifetime.
• 4 breaker points pulverize material more efficiently for faster drilling.
• Enhanced rebar guards for improved resistance when hitting rebar.
• New variable flute design. Thin flute at the tip for maximum debris extraction, higher speed, and less friction. Thick flute at the base for higher stability and reduced bit breakage. Up to 20% moreholes per battery charge vs. 4 cutter drill bit in concrete and vs. the previous generation.
• PGM rated.
• Made in Germany.

Basic Information

• Diameter (MM): 24
• Pack Quantity: 1
• Total Length (MM): 320
• Working Length (MM): 200
• Article Number: 4932352772

Product Description

• Large carbide tip with patented rebar chamfers. Ensures lower vibration and optimized drilling performance when hitting reinforced steel, resulting in a longer lifetime.
• Especially developed robust head geometry with optimum 4 x 90° symmetry of carbide tip. Reduces jamming up when hitting reinforcing steel.
• Centering point with 130° point angle. Enables easy spot drilling with pinpoint accuracy and ensures optimum guidance during drilling.
• Big, robust secondary cutter with dynamic, curved cutting edge. Supports the primary cutter for faster drilling.
• Shorter spiral windings for fastertransport of drilling dust from the head to the flute, resulting in less wear and heat build-up at the tip.
• Innovative, unique carbide tip with more carbide on all diameters and extra carbide on ? > 32 mm.
• Wear mark on both sides of the primary cutter guarantees diameter accuracy for anchor fittings and serves as a lifetime indicator in warranty cases.
• Patented reinforced flute geometry lowers vibrationsfor smoother drilling, stronger flute means fewer breakages, and better transfer of hammer energy to the tip.
• Deep flute shoulders for high-volume dust removal, optimum drilling speed, and reduced wear and heat build-up.
• Low vibration drilling performance for comfortable drilling and less stress on both the operator and the machine.
• Special surface treatment with shot blasting provides a smooth surface,densifies the surface structure, and makes the bit more wear-resistant.
• PGM conformity guarantees precise holes for anchor fitting over the entire lifetime of the drill bit.

Features

• 1 x 2.0Ah Lithium+ battery and charger
• Lithium+ battery technology gives more power, longer runtimes and better durability than previous lithium batteries
• IntelliCell™ technology monitors and balances individual cells to maximise run-times, storage life and safety
• Drive up to 600 4x32mm screws with R18DD3
• Cut up to 34 metres of 13mm plywood with R18CS
• Runtime can vary by tool, battery and application
• Compatible with all Ryobi 18V ONE+ tools

Basic Information

• Lens Colour: Clear
• Material: Polycarbonate
• Pack Quantity: 48
• Packaging (Inner/Master): 1/48
• Packaging Style: Bulk Pack (48pcs)
• Standard and Rating: MT 166 FT CE | 2C-1.2 MT 1FT KN CE
• Article Number: 4932479027
• Weight (g): 37

Product Description

• Durable anti-scratch lenses.
• Long-lasting anti-fog lenses.
• Comfortable and flexible arms for extended comfort wear.
• Clear and tinted options offer eye protection whether working indoors or outdoors.
• European Certified: EN166and EN170/EN172.

Features

Impact resistant material on back of the hand and fingers reduces and absorbs shock.

Reinforced nitrile coating with added protection between thumb and fingers.

Excellent grip performance - nitrile material performs better than other materials in extreme temperatures and oily surfaces.

SMARTSWIPE™ palm and fingertips - allows the use of touch screen devices without removing gloves.

European Certified for cut resistance protection including impact testing: EN ISO 21420 and EN388:2016 (4343CP).

Basic Information

• COLOUR CODE: Black
• CUT LEVEL: C
• DESCRIPTION: Impact CutC Gloves - Available from size 7/S to 11/XXL
• GAUGE (STITCHES / INCH): 18
• MATERIAL: HPPE, polyester, glass fiber, elastic fiber. Coating: Nitrile. Reinforcement: Nitrile
• PACK QUANTITY: 1
• PERIOD OF OBSOLESCENCE: Gloves can be used out of the pack 5 years after production date, printed on the glove. Gloves should be used within 3 years after their purchase. Glove life time in use is based on wear and abrasion.
• SIZE: 8 / M
• STANDARD AND RATING: EN 388:2016 (4343CP)
• STORAGE INSTRUCTIONS: Keep in its original packaging, under normal temperature and humidity conditions and in clean, covered and ventilated premises. Gloves can be used out of the pack 5 years after production date, printed on the glove. Gloves should be used within 3 years after their purchase. Glove life time in use is based on wear and abrasion.Storage temperature: -5°C to 35°C. Storage humidity: 20%-75%
• USAGE INSTRUCTIONS: Do not wear gloves when in the vicinity or rotating machine parts (saw blades, drills etc.) Risk of entanglement! The product willnot protect against chemicals, handling of hot or cold or cold objects, very sharp objects which impact the hands with great force or speed. lf tear level ? 1 then do not use near to moving machinery-entanglement hazard. This product is designed to minimize risk / provide protection against general mechanical risk.
• ARTICLE NUMBER: 4932478127
• EAN: 4058546340605

Product Details

• Product Name: TCC Spare Gas Can 80 ml Fuel Gas for Sniper Nailer
• Can Size: 193 x 30 mm
• Fuel Capacity: 80 ml
• Usage: One can of gas can shoot 1,000 nails
• Compatibility: Designed for use with Sniper Nailer
• Article Number: FC80