ADHESIVES

Product Information

• Body: Heavy
• Color: Heavy Clear, Gray or White
• Density: 7.8 lb/gal
• Set Time: Medium
• Max VOC per SCAQMD 1168/316A: 510 g/L
• Specifications:
• Hydrostatic Pressure Test: ASTM D 2564, SCAQMD 1168/316A
• 400 psi min. (73°F, 2 hour cure)
• Flash Point: -4°F (closed cup)
• Shelf Life: 3 year minimum

Product Description

1104HB is a solvent cement designed specifically for use in joining all classes and schedules of PVC (Poly Vinyl Chloride) pipe and fittings through 12 diameter (including Sch. 80). It is a medium setting, high strength PVC Cement. 1104HB meets ‘LOW-VOC’ emission limit, as outlined by SCAQMD 1168/316A to qualify for LEED credits covered under LLED-NC 2.2: Credit 4.1. This productemits less than 510 g/L.

Application

1104HB is formulated for use on piping systems for potable water, DWV (drain, waste, vent), electrical conduit, irrigation and sewer / drain applications. 1104HBis manufactured to the high standard of ASTM D 2564 to ensure a quality product. A sample is kept from each batch to verify the quality of Arrow cements. Follow the directions on can label. Additional information is available upon request. Skill and knowledge on the part of the user is required to make a good quality joint.

Safety Precautions

EXTREMELY FLAMMABLE. Do not use or store near heat, sparks or flame. Use only in well ventilated area. Keep container closed when not in use. Avoid prolonged breathing of vapor. Avoid contact with skin and eyes. In case of skin or eye contact, flush repeatedly with water. Get medical attentionif irritation persists. If swallowed, drink water, do NOT induce vomiting and call a physician. Keep out of reach of children.

Product Details

• Type: All Purpose Cleaner
• Item Package Quantity: 1
• Item Volume: 946 Milliliters
• Temperature application range is O°F - 110°F
• Article Number:PCC-70

Product Description

All of your All Purpose Cleaners needs in the UAE will be satisfied by Parabond C-70 500 ml PVC All Purpose Cleaner, ATC-214. with a ton of features and top-notch performance You won't be dissatisfied with Parabond C-70 500 ml PVC All Purpose Cleaner, ATC-214. One of Parabond's top Cleaning & Housekeeping/Cleaning Chemicals/All-Purpose Cleaners is this item. This cleaner is formulated tobe used with Parabond' PVC, CPVC and ASS solvent cement products. Cleaning the pipe and fitting prior to cementing always yields better results. The cleaner should be used to remove dirt, oil, grease and other foreignmaterial from the surface of the pipe and fittings to be cemented. This will insure a clean joint enabling the installer to apply a uniform amount of cement for a strong, tight joint.

Product Details

• Item Package Quantity: 1
• Item Volume: 473 Milliliters
• Type: Tapes & Adhesives
• Temperature application range: 40°F - 110°F
• Shelf Life: 3 Years
• Article Number: PCP-14

Product Description

Introducing our heavy-bodied, medium-setting, high-strength PVC solvent cement, perfect for joining larger pipe sizes. This specially created solvent cement is designed for use on pressure pipes and fittings up to a 12 diameter that are scheduled 40 and 80. Its applications include potable water, conduit, sewer, drain, waste, and vent (DWV) systems. With its reliable performance, you can trust this PVC solvent cement for secure and durable pipe connections.A specially formulated heavy bodied, medium setting, high strength PVC solvent cement designed for joining larger pipe sizes. For use on Schedule 40 and Schedule 80 pressure pipe and fittings through 12 diameter. Applications include potable water, conduit, sewer, and drain, waste and vent (DWV) systems. When used for pressure applications, pipe and fittings 5 diameter or larger and Schedule 80 systems, use of Parabond' C-60 primer prior to cementing is recommended.

Product Details

• Type: All Purpose Cleaner
• Item Package Quantity: 1
• Item Volume: 946 Milliliters
• Temperature application range : O°F -110°F
• Article Number:PCP-750

Product Description

Introducing Parabond P-750 Pipe Joint Lubricant, the perfect solution for your lubricant, grease, and industrial oil needs in the United Arab Emirates. With a generousvolume of 950 ml, this lubricant provides excellent performance and reliability. Whether you're working on pipe joints or other applications, Parabond P-750 won't disappoint you. Trust its quality and functionality to meet your lubrication requirements.A non-toxic, water soluble, pipe lubricant designed for assembly of gasketed pipe. Adheres to wet or dry pipe.

Product Details

• Raw Materials: Unplasticized Polyvinyl Chloride (UPVC), Tetrahydrofurane (THF stabilized), Ethylmethylketone (MEK), Cyclohexanone
• Density [g/ml]: 0.96
• Viscosity [mPs]: 1800 - 3500
• Gap Filling Properties [mm]: +0.2 mm, Press Fit up to +0.6 mm
• Open Time: 4 mins at 23°C
• Temperature Resistance [T]: Up to 60°C
• Chemical Resistance: Very Good
• Color: Transparent
• Papckaging Size: 500g
• Papckaging Type: Can/Brush
• Surface Should Be: Dry and Clean
• Scope of Use: Pressureless rigid UPVC pipe systems (Drainage and Sewage, etc.)
• Article Number: 333455

Product Details

• Raw Materials: Unplasticized Polyvinyl Chloride (UPVC), Tetrahydrofurane (THF stabilized), Ethylmethylketone (MEK), Cyclohexanone
• Density [g/ml]: 0.96
• Viscosity [mPs]: 1800 - 3500
• Gap Filling Properties [mm]: +0.2 mm, Press Fit up to +0.6 mm
• Open Time: 4 mins at 23°C
• Temperature Resistance [T]: Up to 60°C
• Chemical Resistance: Very Good
• Color: Transparent
• Papckaging Size: 500g
• Papckaging Type: Can
• Surface Should Be: Dry and Clean
• Scope of Use: Pressureless rigid UPVC pipe systems (Drainage andSewage, etc.)
• Article Number: 44354

Basic Information

• Packaging: 20 Kg bags
• Colors: Grey
• Article Number: LA170305002521M

USES

• Designed for interior installation only. Small / medium size ceramic tile on floor & wall. For Thin Set Installation

TECHNICAL DATA

Working Properties (At 25ºC)

• Wet density: 1.80 gm/cm³
• Open time: 30 minutes
• Pot life: 2 Hrs.
• Time to traffic: 48 Hrs

Product Description

• Bond is a grey/white powder composed of cement, polymer, and special fillers. Developed exclusively for use in hot climatic. After mixing with the recommended water, it becomes a cohesive and easy-to-use adhesive for ceramic tile using the thin-set method.
• Mixing - Place clean potable water into a clean pail. Add Bond powder. Useapproximately 4.4 – 4.6 Liters of water for 20 Kg bag of powder. Mix by hand or with a slow speed mixer to a smooth, trowelable consistency. Allow mortar to slake for 5 – 10 minutes. Adjust consistency if necessary. Remix and apply with the proper sized notched trowel. Note: Bond can also be mixed with 3701 latex Admix to enhance the bond strength and other properties. Contact technical service for further information.

Basic Information

• Packaging: 20 Kg bags
• Colors: White
• Article Number: LA170305002522M

USES

• Designed for interior installation only. Small / mediumsize ceramic tile on floor & wall. For Thin Set Installation

TECHNICAL DATA

Working Properties (At 25ºC)

• Wet density: 1.80 gm/cm³
• Open time: 30 minutes
• Pot life: 2 Hrs.
• Time to traffic: 48 Hrs

Product Description

• Bond is a grey/white powder composed of cement, polymer, and special fillers. Developed exclusively for use in hot climatic. After mixing with the recommended water, it becomes a cohesive and easy-to-use adhesive for ceramic tile using the thin-set method.
• Mixing - Place clean potable water into a clean pail. Add Bond powder. Use approximately 4.4 – 4.6 Liters of water for 20 Kg bag of powder. Mix by hand or with a slow speed mixer to a smooth, trowelable consistency. Allow mortar to slake for 5 – 10 minutes. Adjust consistency if necessary. Remix and apply with the proper sized notched trowel. Note: Bond can also be mixed with 3701 latex Admix to enhance the bond strength and other properties. Contact technical service for further information.

Product Details

• Type: PVC Cement Clear
• Size: 0.5KG/473ML
• Suitable for: All PVC pipes and fittings
• Article Number: AASP8337