Authorized Distributor of Milwaukee, TCC, Arrow, Parabond in Dubai and other U.A.E Region.

Features

• Cordless caulking gun ideal for for use with caulk, sealant and adhesives
• 225kg / 2225N of force powerful enough for even high viscosity sealants
• Integrated on-board puncture tool to help open the tube or open any clogs
• Easy release manual push rod for quick reloading
• Lock-on switch positioned under trigger helps prevent accidental starts reducing waste
• 6 speed adjustment lever for precise control over the rate of flow

Features

• A pivoting mechanism allows for quick changes between straight and right-angle orientations for easier reach in confined areas
• The brushed motor delivers 200 RPM and 5 Nm allowing for easy screwdriving without the worry of damaging the material
• A two finger trigger and ergonomic handle adds comfort and control

Basic Information

• Pack Quantity: 1
• Shank Type: Round
• Article Number: 4932471773

Product Description:

• Comfortable Tri-Lobe handle optimized for maximum user comfort and high torque applications.
• Permanent visible ID markings allows for quick tool identification.
• Lanyard hole for easy attachment to a safety system.
• Hardened magnetic tips for maximum durability and fastener retention.
• Anti-roll, 3-sided collar on the handle.
• Wrench-ready shank allows extra leverage to be applied.

Basic Information

• Pack Quantity: 1
• Shank Type: Round
• Article Number: 4932471774

Product Description

• Comfortable Tri-Lobe handle optimized for maximum user comfort and high torque applications.
• Permanent visible ID markings allows for quick tool identification.
• Landyard hole for easy attachment to a safety system.
• Hardened magnetictips for maximum durability and fastener retention.
• Anti role, 3 sided collar on the handle.
• Wrench ready shank allows extra leverage to be applied.

Basic Information

• Blade Length (MM): 305
• Material Type: TC
• Max. Cutting Capacity Aerated Concrete (MM): 10 - 250
• Max. Cutting Capacity Cast Iron Pipe (MM): -
• Max. Cutting Capacity Fibre Glass (MM): 6 - 150
• Max. Cutting Capacity Metal Pipe Ø (MM): -
• Max. Cutting Capacity Red Brick (MM): -
• Pack Quantity: 1
• Ref. No.: S1241HM
• Article Number: 48001080

Basic Information

• Aerated and Breeze Concrete Blocks: Most Suitable
• Artificial Stone: Most Suitable
• Artificial Stone - Hard: Most Suitable
• Bore Size (mm): 22.23
• Concrete Tiles: Most Suitable
• Cutting Width (mm): 2.6
• Disc Diameter (mm): 230
• General Building Materials: Most Suitable
• Gneiss: Suitable
• Granite: Most Suitable
• Granite Tiles and Slabs: Suitable
• Lime and Sandstone Blocks Hard: Most Suitable
• Lime and Sandstone Blocks Medium: Most Suitable
• Lime and Sandstone Blocks Soft and Abrasive: Suitable
• Marble Tiles and Slabs: Suitable
• Pack Quantity: 1
• Poroton: Most Suitable
• Porphyry: Most Suitable
• Roof Tiles Clay: Suitable
• Roof Tiles Concrete: Suitable
• Screed: Suitable
• Segment Height (mm): 10
• Slate: Most Suitable
• Stoneware and Clay Tiles: Most Suitable
• Type: DUH 230
• Wheel Size (mm): 230
• Article Number: 4932399542

Product Description

• A trade laser welded quality blade with exceptional performance in hard materials such as hard concrete, block paviors and masonry products.

Basic Information

• Colour Code: Red
• Cut Level: (Not specified)
• Gauge (Stitches / Inch): 13
• Material: HPPE, polyester, glass fiber, steel fiber elastic fiber. Coating: Nitrile. Reinforcement: Nitrile.
• No. of Pairs: 1
• Pack Quantity: 1
• Size: 11 / XXL
• Standard and Rating: EN 388:2016 (4X44EP)
• Article Number: 4932479573

Product Description

• Impact resistant material on back of the hand and fingers reduces and absorbs shocks.
• Double layer of nitrile for added durability and increased protection from sharp objects.
• Reinforced nitrile coating with added protection between thumb and fingers.
• Excellent grip performance - nitrile material performs better than other materials in extreme temperatures and oily surfaces.
• SMARTSWIPE™ palm and fingertips - allows the use of touch screen devices without removing gloves.
• European Certified for cut resistance protection including impact testing: EN ISO 21420 and EN388:2016 (4X44EP).

Features

• Telescopic Pole lengthens to 1.4m for an extended reach, shrinks to 97cm for a more compact tool and easy storage
• 6-position Pivoting Head provides flexibility and comfort, allowing you to customise the brush angle to get the best result
• IPX7 Water Resistance Rating allows you to submerge the scrubber in up to 1m of water for 30 minutes.
• Adjustable Handle can be positioned at the right spot for any user height or application

Basic Information

• Pack Quantity: 1
• Shank Type: Round
• Article Number: 4932471778

Product Description:

• Comfortable Tri-Lobe handle optimized for maximum user comfort and high torque applications.
• Permanent visible ID markings allow for quick tool identification.
• Lanyard hole for easy attachment to a safety system.
• Hardened magnetic tips for maximum durability and fastener retention.
• Anti-roll, 3-sided collar on the handle.
• Wrench-ready shank allows extra leverage to be applied.

Basic Information

• Diameter (Inch): 1 ¼
• Diameter (MM): 32
• Max. Cutting Depth (MM): 41
• Pack Quantity: 1
• Article Number: 49560062

Product Description

• Cutting edge technology for maximum productivity.
• Tooth design - A 3.5 teeth per inch tooth design with a positive 10° tooth angle provides the following benefits:
  • Faster and more aggressive cut.
  • Improved heat dispersion during cutting ensures that the teeth stay sharper for longer.
  • Deeper curved gullets provide more efficient chip clearance preventing clogging and heat build up.
  • Special shaped tooth angle has less tendency to snag on thinner materials.
  • Teeth are alternate/side set to minimise binding and friction.
  • Requires less feed pressure - This is achieved by the combination of aggressive tooth geometry and good chip clearance resulting in the requirement of less force during drilling.
• Tooth material - Type Matrix II premium high speed steel is used for the toothed area of the holesaw. Matrix II steel contains 8% cobalt allowing the teeth to retain the original tooth hardness even at high working temperatures when used in metal cutting applications.
• Bi-Metal construction - High speed steel teeth are laser welded