Basic Information

• Diameter (MM): 8
• Pack Quantity: 1
• Total Length (MM): 215
• Working Length (MM): 150
• Article Number: 4932352023

Product Description

• Symmetrical 4 cutter geometry (4 x 90°). Perfect round holes for optimal anchor fitting.
• New sharper angled tip design for easy spot drilling with pinpoint accuracy and increased performance on rebar.
• One piece solid full welded carbide tip on 5-10 mm and one piece slotted carbide tip on 12-32 mm for best lifetime.
• 4 flute geometry: The high volume 4 flute geometry ensures the optimum removal of dust and debris.
• Centering tip for easy spot drilling with pinpoint accuracy.
• Welded solid carbide tip on ⌀ 5-10 mm. Allows for wider flute entrance leading to increased speed. More carbide leads to a higher durability of the tip and higher lifetime.
• 4 breaker points pulverize material more efficiently for faster drilling.
• Enhanced rebar guards for an improved resistance when hitting rebar.
• New variable flute design. Thin flute at the tip for maximum debris extraction, higher speed, and less friction. Thick flute at the base for higher stability and reduced bit breakage. Up to 20% more holes per battery charge vs 4 cutter drill bit in concrete and vs. the previous generation.
• PGM rated.
• Made in Germany.

Basic Information

• Diameter (mm): 4.5
• Pack Quantity: 10
• Total Length (mm): 80
• Working Length (mm): 47
• Article Number: 4932352386

Product Description

• THUNDERWEB design is characterized by a conical-shaped web that gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at the narrowest point, the THUNDERWEB core is thicker than that of a standard drill bit.
• Parabolic web cross-section: Large web thickness. Strength built-in.
• Flute geometry - THUNDERWEB flute form ejects hot chips rapidly. Dissipates heat better, increasing lifetime.
• 135° Split point - Precision starting, drill bit won't walk on the material surface.
• Polished finish reduces friction and extends drillbit life.
• Impact-resistant ABS case with added rubber corner protection.
• Accepts higher feed pressure and torque, equaling fewer breakages.

Product Details

• Total Length: 151mm
• Number: 5st
• Drill Length: 101mm
• Diameter: 12mm
• Article Number: 4932352403

Product Description

• Generous body thickness
• Built-in power
• Accepts higher feed pressure and torque
• Suitable for drilling deep holes and for drilling in curved surfaces
• Long lifespan

Product Details:

• Thunderweb Design: Conical shaped web with increasing thickness towards the back of the drill bit
• Parabolic Web Cross Section: Large web thickness for added strength
friction and extends drill bit life
• Impact Resistant ABS Case: With rubber corner protection
• Accepts Higher Feed Pressure and Torque: Less breakages
• Diameter: 5mm
• Pack Quantity: 10
• Total Length: 86mm
• Working Length: 52mm
• Article Number: 4932352388

Basic Information

• Diameter (mm): 3.5
• Pack Quantity: 10
• Total Length (mm): 70
• Working Length (mm): 39
• Article Number: 4932352383

Product Description

• THUNDERWEB design is characterized by a conical-shaped web which gets thicker towards the back of the drill bit. Standard drill bits have a constant thickness throughout their length. Even at thenarrowest point, the THUNDERWEB core is thicker than that of a standard drill bit.
• Parabolic web cross-section: Large web thickness. Strength built-in.
• Flute geometry - THUNDERWEB flute form ejectshot chips rapidly. Dissipates heat better, increasing lifetime.
• 135° Split point - Precision starting, drill bit won't walk on the material surface.
• Polished finish reduces friction and extends drill bit life.
• Impact-resistant ABS case with added rubber corner protection.
• Accepts higher feed pressure and torque, equaling fewer breakages.

Product Details:

• Designed to provide ultimate durability and all-day comfort, ideal for material handling or light construction duty.
• Reinforced palm due to a nitrile texture.
• DeSO 21420 and EN388:2016 (4121A).
• Colour code: White.
• Cut level: A.
• Description: Cut A Gloves - Available from size 7/S to 11/XXL.
• Gauge (stitches / inch): 13.
• Material: Nylon, lycra blend knit. Coating: Nitrile.
• Max. washing cycles: 5 x.
• Size: 10 / XL.
• Article number: 4932479010.

Basic Information

• Diameter: Ø 6mm
• Working Length: 150mm
• Total Length: 210mm
• Article Number: 4932471219

Product Description

• 2 flute carbide tip for better drilling performance.
• The 2-groove design provides effective dust removal.
• Designed for drilling in concrete (unreinforced) and brick.
• Suitable for drilling holes for chemical and mechanical anchors.
• Made in Germany.

Basic Information

• Diameter: Ø 12mm
• Working Length: 200mm
• Total Length: 260mm
• Article Number: 4932471238

Product Description

• 2 flute carbide tip for better drilling performance.
• The 2-groove design provides effective dust removal.
• Designed for drilling in concrete (unreinforced) and brick.
• Suitable for drilling holes forchemical and mechanical anchors.
• Made in Germany.

Product Details

• L [mm]: 133.00
• D: 10.00
• Typ: HSS-G Thunderweb
• Amount of elements: 5
• Working length: 87.00
• Handle: cylindrical
• Metaldrill bits HSS Ground - DIN 338
• 10.0mm diameter and 87mm working length.
• Article number: 4932352399

Product Description

• Thunderweb design is characterized by a conical-shaped web which gets thicker towards the back of the drill bit
• Standard drill bits have a constant thickness throughout their length
• Even at the narrowest point, the Thunderweb core is thicker than that of a standard drill bit
• Parabolic web cross-section: Large web thickness. Strength built-in
• Flute geometry - Thunderweb flute form ejects hot chips rapidly. Dissipates heat better, increasing lifetime
• 135° Split point - Precision starting, drill bit won't walk on material surface
• Polished finish reduces friction and extends drill bit life
• Impact-resistant ABS case with added rubber corner protection
• Accepts higher feed pressure and torque, equalling fewer breakages

Product Details:

• Applications: Iron and sulphur free thin cut-off wheels for steel
• Suitable for: Acid-resistant steel, Hardox, High-alloy steel, Mild and tool steel (Not suitable for stainlless steel).
• Thickness (mm): 1.5
• Axle hole Ø (mm): 22.2
• Ø (mm): 115
• Article Number: 4932451476

Basic Information

• Diameter (MM): 14
• Pack Quantity: 1
• Total Length (MM): 210
• Working Length (MM): 150
• Article Number: 4932352037

Product Description

• Symmetrical 4 cutter geometry (4 x 90°). Perfect round holes for optimal anchor fitting.
• New sharper angled tip design for easy spot drilling with pinpoint accuracy and increased performance on rebar.
• One piece solid full welded carbide tip on 5-10 mm and one piece slotted carbide tip on 12-32 mm for best lifetime.
• 4 flute geometry: The high volume 4 flute geometry ensures the optimum removal of dust and debris.
• Centering tip for easy spot drilling with pinpoint accuracy.
• Welded solid carbide tip on ? 5-10 mm. Allows for wider flute entrance leading to increased speed. Morecarbide leads to a higher durability of the tip and higher lifetime.
• 4 breaker points pulverize material more efficiently for faster drilling.
• Enhanced rebar guards for improved resistance when hitting rebar.
• New variable flute design. Thin flute at the tip for maximum debris extraction, higher speed, and less friction. Thick flute at the base for higher stability and reduced bit breakage. Up to 20% moreholes per battery charge vs. 4 cutter drill bit in concrete and vs. the previous generation.
• PGM rated.
• Made in Germany.

Basic Information

• Diameter (MM): 16
• Pack Quantity: 1
• Total Length (MM): 160
• Working Length (MM): 110
• Article Number: 4932430726

Product Description

• Symmetrical 4 cutter geometry (4 x 90°). Perfect round holes for optimal anchor fitting.
• New sharper angled tip design for easy spot drilling with pinpoint accuracy and increased performance on rebar.
• One piece solid full welded carbide tip on 5-10 mm and one piece slotted carbide tip on 12-32 mm for best lifetime.
• 4 flute geometry: The high volume 4 flute geometry ensures the optimum removal of dust and debris.
• Centering tip for easy spot drilling with pinpoint accuracy.
• Welded solid carbide tip on ? 5-10 mm. Allows for wider flute entrance leading to increased speed. Morecarbide leads to a higher durability of the tip and higher lifetime.
• 4 breaker points pulverize material more efficiently for faster drilling.
• Enhanced rebar guards for improved resistance when hitting rebar.
• New variable flute design. Thin flute at the tip for maximum debris extraction, higher speed, and less friction. Thick flute at the base for higher stability and reduced bit breakage. Up to 20% moreholes per battery charge vs. 4 cutter drill bit in concrete and vs. the previous generation.
• PGM rated.
• Made in Germany.