Products

• single hole installation
• metal lever
• GROHE Longlife 28 mm ceramic cartridge
• GROHE StarLight chrome finish
• mousseur
• pop-up waste set 1"
• flexible connection hoses
• rapid installation system

32810000GH32810000

• wall mounted
• metal handles
• heat insulated
• GROHE StarLight finish
• Longlife headparts
• swivel tubular spout
• swivel area 360‚°
• S-un ions

31191001GH31191001

• Strong: Robust 1.06 mm thick body.
• Shatter resistant: The bi-metal blade body will bend and flex but not break.
• Torch: - Thick 1.06 mm robust blade body for precise cu ts in sheet metal and pipes.
• 25 mm blade height for improved stability and minimum vibration.

L48005784MIL48005784

• Impact rated drill bitwith ¼"³ hex shank optimised for impact drivers.
• Titanium Nitride coating dispenses heat and makes the drill bit suitable for use also in high speed.
• QUAD EDGE™¾" Tip: unique combination of 135° split point and four cutting edges: 135° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat bui ld up for longer life.
• Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
• Enhanced tapered web: Wider core towards the shank of the dri ll bit. Strengthens the core to increase overall flute durability.

L48894729MIL48894729

• SDS PLUS 3PC CHISEL SET

L4932430001MIL4932430001

• final installation for
• 33 963 000
• without concealed body
• GROHE StarLight chrome finish
• GROHE FastFixation covered fixation
• automatic diverter: bath/shower
• escutcheon- and shaft-sealing
• metal wall escutcheon

19450002GH19450002

• Consisting of:
• head shower Euphoria 260 (26 457)
• 3 spray patterns:
• Rain, SmartRain, Jet
• Rainshower shower arm ceiling 142 mm (28 724 000)
• GROHE EcoJoy 9.5 l/min flow limiter
• GROHE DreamSpray perfect spray pattern
• GROHE StarLight chrome finish
• SpeedClean anti-limescale system
• Inner WaterGuide for a longer life
• suitable for instantaneous heater

26088001GH26088001

• without finishing trim set
• GROHE SilkMove 46 mm ceramic cartridge
• adjustable flow rate limiter
• body of DR brass

35501000GH35501000

• Impact rated drill bitswith ¼"³ hex shank for universal use in impact drivers as well as drill drivers.
• Titanium Nitride coating dispenses heat and makes the drill bit suitabl e for use also in high speed.
• QUAD EDGE™Tip: unique combination of 135‚° split point and four cutting edges: 135‚° split point allows for precise & fast drilling start without walking. Four cutting edges create s maller chips to prevent heat build up for longer life.
• Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out faster.
• Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.

L48894759MIL48894759

• Especially engineered blades for exclusive use on 12 V HACKZALL™.
• Bi-Metal construction for increased tooth durability.
• Optimised tooth form for aggressive and faster cutting.
• Thinner blade body for better speed of cut and up to 35% more cuts per charge vs. standard Bi Metal blades.
• 75 mm scraper: for removing strong adhesive silicon, caulk, paint and rust.
• 125 mm wide scraper: for removing glue, silicon, caulk, vinyl, rust, paint and wallpaper.
• Grout removal blade: for removing damaged or moulded grout between tiles.

L49220220MIL49220220

• Cutting edge technology for maximum productivity.
• Tooth design - A 3.5 teeth per inch tooth design with a positive 10‚° tooth angle provides the following benefits: - Faster a nd more aggressive cut. - Improved heat dispersion during cutting ensures that the teeth stay sharper for longer. - Deeper curved gullets provide more efficient chip clearance preventing clogging and heat build up. - Spe cial shaped tooth angle has less tendency to snag on thinner materials. - Teeth are altenate side set to minimise binding and friction. - Requires less feed pressure - This is achieved by the combination of aggressive to oth geometry and good chip clearance resulting in the requirement of less force during drilling.
• Tooth material - Type Matrix II premium high speed steel is used for the toothed area of the holesaw. Matrix II ste el contains 8% cobalt allowing the teeth to retain the original tooth hardness even at high working temperatures when used in metal cutting applications. - Bi-Metal construction - High speed steel teeth are laser welded onto a high alloy steel body. The teeth are then vacuum hardened to 65 HRC at a temperature of 600‚°C to give maximum durability and life time. - Due to the high wear resistance of the Matrix II material, these holesaws are ideal for cutting difficult and hard materials such as stainless steel and acid resistant steels as well as softer materials like wood.
• Holesaw body - 1.27 mm thick steel holesaw body is rigid to retain its shape but also has built in elasticity. - Effective sawing depth is 41 mm.
• Back plate design - The back plates are constructed with thick steel thus the holes will not enlarge over time. Thick backs add strength and rigidity minimising vibrations. - 4 drive pin holes for easier arbor location. - Perfectly manufactured round back plate, especially important for the larger diameter holesaws.
• Diagonal slots aid the removal and ejection of the core.
• Applications - High quality manufacturing techniques ensure high rotational precision, therefore these holesaws are suitable for use both in hand and pillar drills (manual feed only).L49224152MIL49224152

• Metal drill bits ground from solid, extremely heat resistant 5% cobalt-alloyed high speed steel produced according to DIN 338.
• Suitable for drilling high alloy content steels and metals with tensile strengths over 1000 N/mm‚² like stainless steel.
• QUAD EDGE™ Tip: unique combination of 135‚° split point and four cutting edges: 135‚° split point allows for precise & fast drilling start without walking. Four cutting edges create smaller chips to prevent heat build up for longer life.
• Variable flute geometry: For faster material ejection. Helps the bit run cooler and prevent it from burning out f aster.
• Enhanced tapered web: Wider core towards the shank of the drill bit. Strengthens the core to increase overall flute durability.
• 3-flat shank from 5 mm for better grip and prevents chuck slippage.
• Colour: bronze.

L4932352471MIL4932352471